Audi RS6, S6, S7 and S8.
Hi, Having seen a similar count of cars on other forums. I thought I would set one up over here. If you have a RS6, you can post the Colours,...
Been compiling a list of the VIN's for the US based RS6's to see if any particular trends may have developed (trans failures, DRC failures, color...
Please find a collection of threads that has been written by our members over the years. The focus is on DIY and FAQ. If you feel a thread needs...
I have an RS6 that was hit in the front driver’s side, andfrom which I will be taking most parts and transferring to the A6 shell, lessthe...
I did the front brakes + Rotors (Audi Rotors, EBC Yellows, an easy brake job for sure!) Thursday and in the process of inspecting everything while...
having a tape deck in the dash is just...so dated. There's the RNS-E, but that's a lot of coin for what you get - I price it as a $400 stereo and...
After beating up my BBS wheels a bit, and not wanting to run on the OEM wheels for track events- I am on da hunt for track wheels.. ...
Anyone experiences with these mods...? Looks like it will suffer from heatsoak this way... ...
12248 http://vimeo.com/36167357 - Bella's Hammer does Infineon! Good times at Infineon with a total of 3 Justins on track at once, what are the...
I was driving to MSP airport parking for a biz trip today and had a little problem. I drove for 1.5 hours without incident to the parking ramp. Then,...
I was told that turning them will F them up if not done on a proper type of mill.. standard brake rotor turning machine will get the bit fouled up by...
Hi all, Well after reading this forum for a couple of months and having another 2000 A6, I just couldn't help myself. My wife picked up #905084...
Hi guys, My name is Rui from Portugal and i own a 12/2002 C5 RS6 Avant since last year with 97.000 kms. After installing a GPL (LPG) system, a...
I just pulled the TCU out with the intent to see if has been upgraded. To my surprise, there are tabs holding the clamshell shroud together. I've...
http://www.youtube.com/watch?feature=player_embedded&v=lw9ZeXB2uKs
Took the new "family car" to Infineon today for a day of driving with the instructors at Sim Raceway. The RS6 is an amazing car on the track. I ran...
Hi all...my son and I have been parting out a 2003 RS6 that was wrecked in the front. We've stripped everything down and are left with the shell. At...
Picked up my Avus RS 6 last Saturday and I'm still pinching myself to make sure it's real. I'm sure when that first repair bill comes along it will...
I have a few suspension questions relating specifically to a 2001 A6 4.2L Sport vs 2003 RS6 suspension... In the spec literature, Audi states the...
Falling on hard times ... Looking to unload my :rs6kiss::cry:puke:.The problem is, I still owe about 19k on the car---I prolly shoulda never bought...
Well guys, my timing belt/water pump maintenance is in full swing. I decided to remove the entire front support to gain easier access to everything....
116211162011619Some pics of my exhaust manifolds that I recently had ceramic coated. 11618 They are fairly high res so you should be able to get a...
Happy New year boys and girls i know some of you do tranny fluids , (as i do too) but has anyone done diff fluids, if so any reccomendations of...
There are currently 85 users browsing this forum. (1 members & 84 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules