Recoding the RS6 locking control module. Full write up at:
hypertension-motorsports
I exchanged my UNI-COM, which did not fully work on the C5 platform, for a Hex-USB VAG tool. Really good purchase in my opinion.
I enjoy the fact that once I unlock the car using the remote, I am able to unlock all four doors. I also enjoy that I am able to open or close all car windows using the remote.
If you like this kind of functionality, then recoding the locking control module is for you.
I have only tried the recoding on a 2003 Audi RS6, which comes with the Symphony radio. Please note that
Audi of America (AoA) does not officially recognize the existence of this feature as of this posting. Although many dealers know this feature exist, most are unwilling to assist you in the recoding.
This modification can be done using Ross-Tech's VAG tool. If you don't have one handy, you might be able to find another Audi enthusiast that is willing to help you using the VAG Tool Locator.
Warnings:
1: Vehicle should be turned off and in 'Park'.
2: Please read instructions fully before attempting modification.
3: I assume no liability or responsibility for any damages that may arise either directly or
indirectly as a result of the application of the information provided herein.
4: Codes tested on US bound RS6 only.
Functions
Software Coding
- (Factory Default)
- Safety Central Locking
- Horn sounds when arming
- Lights flash when arming
15885
- Window control with remote
- 1 touch unlock of all 4 doors
- No horn sound when arming
- Lights flash when arming
14921
- Window control with remote
- 1 touch unlock of all 4 doors
- Horn sounds when arming
- Lights flash when arming
15945
- Window control with remote
- Safety Central Locking
- Horn sounds when arming
- Lights flash when arming
15949
- Window control with remote
- Safety Central Locking
- No horn when arming
- Lights flash when arming
14925
- Window control with remote
- 1 touch unlock of all 4 doors
- No horn sound when arming
- Lights flash when arming
- Automatic door lock/unlock
14953
- Window control with remote
- 1 touch unlock of all 4 doors
- Horn sounds when arming
- Lights flash when arming
- Automatic door lock/unlock
15977
- Window control with remote
- Safety Central Locking
- Horn sounds when arming
- Lights flash when arming
- Automatic door lock/unlock
15981
- Window control with remote
- Safety Central Locking
- No horn when arming
- Lights flash when arming
- Automatic door lock/unlock
14957
Safety Central Locking:1st press of the remote unlocks driver's door, and 2nd press opens all other doors.
Using VAG tool instructions
Step 1: Open VAG tool main screen as shown on figure 1 below. Click the 'Select' button from the
'Select Control Module' section.
Fig. 1
Step 2: On the 'Select Control Module' screen as shown on figure 2 below, click the '35-Centr. Locks'
button.
Fig. 2
Step 3: On the 'Open Controller' screen as shown on figure 3 below, click the 'Recode - 07'
button.
Fig. 3
Step 4: On the 'Recode Module' screen as shown on figure 4 below, take note of the default software
coding value set on your car. In case the change doesn't work, we can safely revert to our old settings.
Fig. 4
Step 5: On the 'Recode Module' screen as shown on figure 5 below, change the 'Sofware Coding'
value to match the one you wish to use from the table above. Once that is done, click the 'Do It!' button to
persist the new settings.
Fig. 5
Run a test to make sure the change took place. If the test is not successful, unlock the car using the key on the door
instead of using the remote. Change the settings back to default if you wish.