View Full Version : RS6 Mods.. I've decided!!
January 15th, 2003, 16:12
Right, I've made my mind up and am going for the following :
MTM Chip , Milltek exhaust ( www.milltek.co.uk) & Hyperboost valves...
should bring me upto about 512 bhp and monster torque :D
Booked in for Feb.. I'll let you know how I get on and try to get some pictures done.. oh and of course the car will have the super MTM badge on the back of it...
"When ever is enough power enough??" :D
January 15th, 2003, 17:10
I guess the tourqe will be the most impressive part! :MTM:
Does MTM upgrade the software for the tiptronic aswell?
Anyways, I bet you wont be dissapointed! :D
January 15th, 2003, 18:15
Ah excellent! I keep my MTM badge hidden in the glove compartment. Only I know, that's enough, until someone gets a small surprise.
Like a small little TT that had to move over :MTM:
Edit: Dave, what exactly is the hyperboost valve and what does it do?
Edit 2: Found it!
Picture of the Miltek Exhaust.
Mr. Fru-T Pants
January 15th, 2003, 22:07
Sweet, Dave. You'll love the Milltek sound.
Have fun, and give us some updates as soon as
January 16th, 2003, 18:06
Dave, any chance of getting some before and after sound or video recordings?
Any information on warranty implications?
January 16th, 2003, 18:14
Yea.. leave it with me.. I'll see what I can do :)
January 16th, 2003, 18:30
Thanks Dave, here's my effort: http://www.rs6.com/forum/showthread.php?s=&threadid=563
January 20th, 2003, 18:12
Slight change of plan guys I'm afraid.. hours after posting this message I had a call out of the blue and the guy said that he had just had the MTM chip + Milltek and that his RS6 was now putting out LESS torque than before... He said that the MTM chip was good and the exhaust good, but together they were causing problems... almost as if the car needed another re-map.
Anyway.. I think I am now going to Abt, there quad exhaust system is almost ready (wouldn't suprise me if it's very similar to the MTM one), so I'm going for the Abt chip (505bhp), gearbox chip, max speed limiter removal and the exhaust.
Again, I will keep you informed of any progress