MB E55 Detail Black, WOW

[DetailersDomain]

This MB E55 is a beast! Car has 13k a needed some major work, swirls, light scratches, ribbons from the last person that put a machine too it. Pictures are not the best but I'm getting there.

This car came out great!!!!

Enjoy!

Total time 4 hours 30 minutes (2 people on it)

Products used:

Pamolive Dish washing detergent (to remove any and all wax on the car)
Shmitt Wash mitt and Shmitt Wheel mitt
1 Bucket with grit guard
Jumbo Waffle Weave Drying Towel
Microfiber Buffing Towels (about 20-30 used)
Boar's Hair Brush
Spoke brush for the inner wheels
Adam's VRT
Adam's Glass Cleaner
Adam's Detail Spray
Adam's Clay Bar
Menzerna Super Intensive Polish
Menzerna 85rd
Swissol Concorso
Swissol Pre-Cleaner
P21S Wheel Cleaner Gel
P21S Autowash
Metabo (hi speed rotary)
PC
Firehose Nozzle
Edge pad blue, green, yellow 6 inch
1Z Einszett Leather conditioner/cleaner
1Z Einszett Cockpit
1Z Einszett Detail Spray

Procedure:
1. Rinsed down the wheels (they were cool enough to touch)
2. Sprayed down the wheels with some P21S Wheel Cleaner Gel
3. Brush and cleaned the wheels with a Boar's Hair Brush
4. Rinsed down the wheels
5. Filled the bucket with water and soap
6. Used the Shmitt to wash the car, from top to hood to sides to rear.
cleaning the Shmitt after each panel was soaped up by dunking it in the bucket with the grit guard at the bottom, rinse and clean the pad and continue on to the next panel repeat till you finish washing each panel.
7. After you wash the car rinse car off throughly
8. Dried the car with a Waffle Weave Drying Towel
9. Used 3M adhesive remover to remove the leftover adhesive from customer debadging his car.
10. Used Adam's Detail Spray and Adam's Clay bar to clay the entire car
11. Used the Metabo with the Menzerna SIP and the E2K green and yellow pads to polish out all the imperfections.
12. Used the Metabo with Menzerna 85RD with the E2K blue pad to polish out the car to a mirror finish.
13. Applied the Swissol Pre Cleaner (needed for the Swissol wax to bond to the car)
14. Removed Pre Cleaner
15. Applied and removed Swissol Concorso (applied with bare hands) (WOW amazing a super wet/deep/shine....)
16. Cleaned up the windows with Adam's Glass Cleaner (interior/exterior)
17. Dressed the tires with Adam's VRT (did one pass on the applicator and did a pass using the dry side as the customer prefers a matte finish)
18. Used 1Z Detail Spray to do a final wipe down on the wheels.
19. Used the 1Z Detail Spray for a final wipe down on the car.

Interior: (sorry no pics)
1. Wiped down the door jambs with 1Z detail spray
2. Vacuumed the mats, carpet, etc.
3. Wiped down the interior and used 1Z Leather Cleaner/Conditioner (applied with a MF Applicator pad 1 pass to apply the next pass on the dry side to wipe to a matte finish, no shine for this customer)
4. Wiped down the dash with 1Z Cockpit
5. Cleaned the glass
6. Wiped down the jambs with 1Z einszett detail spray.
7. Applied Swissvax to the jambs.

Engine: (sorry no pics)

Engine cleaning was done after the wheels, as the engine was still warm
1. Rinsed down the engine
2. Sprayed some P21S Autowash on the engine
3. Brushed the dirt and grime off the engine with a boar's hair brush
4. Sprayed down engine to rinse the P21S off
5. Closed the rear hatch and let it dry
6. Wiped down the jambs and the metal parts with 1Z einszett detail spray.

Before:

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/before.jpg

After Wash:

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/afterwash.jpg

Before right fender: (notice the leftover adhesive from the debadging)

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/beforebadges.jpg

Right fender after wash after clay:

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/beforepass-1.jpg

Right fender after a pass or 2 with Menzerna SIP using yellow E2K pad:

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/aftersip.jpg

Right fender after a couple passes with Menzerna SIP using green E2K pad:

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/aftersip2.jpg

Right fender after a couple passes with Menzerna 85rd using blue E2K pad:

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after85rd3.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after856.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after854.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after852.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after85.jpg

Hood shots before wash:
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/beforehood.jpg

Split shot of hood:

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/beforehoodsplit.jpg

Better shots of what needed to be corrected:
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/correctionhoodsplit.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/correctionhoodsplit2.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/hoodsplit.jpg

Passenger side of hood corrected:

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/hoodsplit1.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/hoodsplit85.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/hoodsplitafter.jpg

After hood outside:

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/afterhood.jpg

Trunk shot before:
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/beforetrunk.jpg

Trunk shot after:

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after3.jpg

Trunk shot after outside:

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/aftertrunk2.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/aftertrunk1.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/aftertrunk.jpg

Debadging before:

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/beforebadgel.jpg

Debadged area after:

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/afterbadge1.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/afterbadge.jpg

[DetailersDomain]

Swissvax Concorso being applied (prior to this we used Swissvax Cleaner Fluid to set up the paint for the wax)

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/swissvaxhood.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/swissvaxhood1.jpg

Hood after the Swissvax Concorso:

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/afterhoodwet.jpg

The rest of the after shots:

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/afterhood1.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after14.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after13.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after12.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after11.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after10.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after9.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after8.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after5.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after7.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after6.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after2.jpg
http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/after1.jpg

Last shot:

http://i46.photobucket.com/albums/f149/pyiu/pete%20e55/aftershot.jpg

[SeattleS4]

Nice work! It looks great. :cool2:

Those cars are sick. My friend has a bone stock '06 that runs 12.1's at 119-120mph and dyno'd at 414hp/469tq to the wheels. :bigeyes:

[Mr Balsen]

As always, very very impressive.....

Cheers,
Frederic

[Ruergard]

Stunning, no other word. As always a magnificent work! Keep it up man! :thumb:

[bober3]

nice car and nice rs6 too do you have pictures of the rs6?

[JasonRS6]

Wow! Nice work! What did it cost to do the whole car?

[DetailersDomain]

I charge about $500 usd on this one

[Damienr8]

You are insane man. The car looks brand new. May I ask how you started in this type of home-brewed detailing business. Were you just pissed one day that cars were dirty and decided to clean them to the max? lol.

[DetailersDomain]

I started with my dad's 87 MB 420 SEL Smoke Silver when I was about 10 years old and it was over from then :D

[Klint]

Not bad Phil...can we see an after shot with flash please? :)

[DetailersDomain]

I don't think I have it for this car, but I'm doing a 997C2S in black tomorrow.

I just picked up a 3m sun gun so I'll take pics with that tomorrow.

Let me see what else I can find.

[DetailersDomain]

Klint,

Here you go a recent c2s lapis blue with flash , sun gun, Brinkmann Xenon.

http://www.rs6.com/forum/showthread.php?t=12493

Let me know what you think.

[Klint]

Klint,

Here you go a recent c2s lapis blue with flash , sun gun, Brinkmann Xenon.

http://www.rs6.com/forum/showthread.php?t=12493

Let me know what you think.
Phil,

That looks great! Excellent work there!

Most Detailers on the forums tend to post the after pictures out of direct light and just capture the reflections.

Again excellent work......i'm a believer!

[DetailersDomain]

Thanks I appreciate that Klint, check out the one I just did today.